{"product_id":"hw38010606","title":"EZRUN Combo MAX8 G2S \u0026 4268SD 2500KV G2R","description":"Introducing the EzRun MAX8 G2S Speed Control and 4268SD 2500KV G2R Combo.\u003cbr\u003e\u003cbr\u003eEzRun MAX8 G2S Optimized hardware, increases in stability and reliability.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eExtreme output, easy to control.\u003c\/strong\u003e\u003cbr\u003eThe ESC has power, yet smooth and linear throttle response. This balance of power and control allows drivers to drive their vehicles at the limit comfortably.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOptimized hardware, increases in stability and reliability.\u003c\/strong\u003e\u003cbr\u003eBased on the Max8 G2 ESC, the brand new G2S ESC is equipped with optimized hardware design application such as intelligent freewheeling technology. The stability and reliability of the ESC has been further\u003cbr\u003eimproved.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-in Bluetooth, directly connected to the mobile APP\u003c\/strong\u003e\u003cbr\u003eThe ESC has a built-in Bluetooth module. It allows you to connect to the mobile APP directly without plugging any device. It is simple and convenient to perform parameter se_x001F_ings, data reading, firmware upgrades and other operations.\u003cbr\u003eNote: The data includes thro_x001F_le amount, voltage, current, temperature, speed, etc.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cu\u003eSpecifications\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCont. \/ Peak Current: 160A\/1050A\u003cbr\u003eMotor Type: Sensored and sensorless\u003cbr\u003ebrushless motor\u003cbr\u003eLipo Cells: 3-6S Lipo\u003cbr\u003eProgramming Method:\u003cbr\u003eiOS or Android smart phone\u003cbr\u003e(installed with the HW LINK app)\u003cbr\u003eSize \/ Weight: 60 x 48 x 40.5mm \/ 192g\u003cbr\u003e(Included input wires\u0026amp;connectors)\u003cbr\u003eMotor Limit: With 4S Lipo: KV_x001E_ 3000\u003cbr\u003eWith 6S Lipo: KV_x001E_ 2400 4278 size motor\u003cbr\u003eBEC Output: 6V \/ 7.4V \/ 8.4V adjustable, continuous current 6A (Switch-mode)\u003cbr\u003eFan intelligent start and stop function\u003cbr\u003eThe ESC fan does not run when the ESC temperature is low; The fan automatically turns on when the ESC temperature reaches the preset value. The intelligent\u003cbr\u003estart and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-in data logging function, ease of obtaining power operating status.\u003c\/strong\u003e\u003cbr\u003eThe ESC has a built in data rcoerding module. Store up to 10 minutes of your most recent run. Using the HW Link V2 App, you can view the data saved to the ESC. In addition, the module allows you to view Real Time Data from the ESC for bench top testing and viewing of the data outputs.\u003cbr\u003eNote: Due to transmission distance of bluetooth, the e_x001E_ective distance\u003cbr\u003eis only about 5m!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEfficient cooling system\u003c\/strong\u003e\u003cbr\u003eA frameless fan with patented technology is used. The large flow of air from the side of the fan e_x001C_ectively blows the heat away from the integrated housing radiator to ensure that the ESC is always in the\u003cbr\u003eoptimal operating temperature.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh level of protection\u003c\/strong\u003e\u003cbr\u003eThe protection level reaches IP67, with excellent waterproof and dust-proof performance. It is able to cope with harsh environments, various climate conditions and has all-weather operation capabilities.\u003cbr\u003eNote: The above-mentioned IP67 protection level is splash-proof, water-resistant, and dust-proof under normal use. It is not permanently e_x001E_ffective, and the protective performance may decrease due to daily wear and aging. Do not soak in water for a long time, otherwise the product may be damaged.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e1\/8th power system turbo timing technology\u003c\/strong\u003e\u003cbr\u003eTurbo timing that is adjustable up to 32 degrees. Using turbo allows motor RPM to be increased through advanced ESC electronic timing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCapacitor overheating protection\u003c\/strong\u003e\u003cbr\u003eThe Capacitor protection prevents damage to the power caps from overheating from overloads or extreme conditions. This protects the ESC from damage.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSuper Built-in BEC\u003c\/strong\u003e\u003cbr\u003eThe ESC has a built-in super BEC with a maximum output current of up to 15A. The output voltage can be switched in three levels of 6V\/7.4V\/8.4V.  Drivers are able to enjoy using high-voltage servos with this function.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWaterproof Sensor Harness\u003c\/strong\u003e\u003cbr\u003eThe proven Hobbywing waterproof sensor harness provides an element proof solution for sensor based systems.\u003cbr\u003eNote: Supports normal adaptor sensored motors, it requires an additional adapter wires for other motors.\u003cbr\u003e\u003cbr\u003eBest Combination: EzRun 4278\/4268 SD G2\u003cbr\u003e\u003cbr\u003eSuitable for;\u003cbr\u003eOn-road\u003cbr\u003eMonster\u003cbr\u003eOff-road\u003cbr\u003eShort Course Truck\u003cbr\u003e\u003cbr\u003e--------------------\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMotor Specification\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBuilt-in intelligent integrated circuit is used so the sensor unit can easily be identified by the ESC when pairing with Hobbywing's XeRun XR8 series of ESC's the motor will operate in “Pure Sensored” mode at all times, providing a better performance and a smoother throttle response.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e1\/8th power system \u0026amp; Turbo Timing technology\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ecan be used when this motor is paired with Hobbywing's XERUN XR8 series of ESC's the Motor can use the Turbo Timing technology which was designed for the XR10 Pro series of Esc's used in 1\/10th On and Off road Competion.The motor will increase to maximum power output instantly. The maximum speed will increased by as much as 50% more than the output of the previous G2 series motors keeping you way ahead of the competition. \u003cbr\u003ePlease Note: When tue G3 Series motors are paired with XR8 Pro G2 ESC the turbo feature can be set to the maximum of 48º. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe mechanical turbo timing of motor can be accurately adjusted in both directions (CW \/ CCW)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe mechanical turbo timing can be adjusted between 20-40°. It is convenient for driver to calibrate accurately output power of motor and meet power requirements of various application.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe efficiency is improved greatly, effectively reducing the temperature incease.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCompared with XERUN 4268\/4274 G2, the motor structure is greatly optimized, the efficiency is improved by 6% or more, which reduces the motor temperature increase effectively (Reducing thermal runaway).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe G3 Series is Fail Safe and reliable using Hobbywing's new motor Hall sensor technology\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe motor sensor system adopts patented technology of \"error-free\" Hall sensor technology, with an independent high-speed and high-precision encoder of which will always output a pure and accurate rotor position signal, which effectively will isolate any external interference which are known to cause errors of the sensor signal.This accurate sensor system will allow the motor to function at its peak performance in a very stable sensor state.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eExcellent dustproof design.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Off-Road motor is IP5X. Its excellent dustproof design will minimise debri entering the motor which is very well known to effect Off-Road applications. \u003cbr\u003eNote: Only 4268-1900KV\/2200KV and 4274-2250KV are IP5X. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLight weight\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe design of 4268SD G3 is optimized which reduces the overall weight of motor. The weight of 1900KV \/ 2200KV is 315g \/ 285g respectively. And the weight of 4268 motor is 330g, 1900kv \/ 2200kv is 20g \/ 45g lighter than peers. The light weight motor is convenient for the driver to adjust the balance performance of the vehicle. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow rpm (no current) torque\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe motor also minimises the low rpm (no current effect) also known as cogging and small torque pulse. It is very smooth at low rpm increasing its performance at low speeds. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdvanced material in the industry and outstanding product design\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e•It was made out of a single piece of 7075 aluminum bar processed by precision CNC. The CNC Stator case has zero gaps or any screws on the surface of the Can body. There is a silicone dustproof ring seal that surrounds the sensor base. The details show originality. \u003cbr\u003e•The front case bell contains two pairs of M3 and two pairs of M4 screw holes, which are suitable for various mounting bases.\u003cbr\u003e•The outlet terminals use a widened U-shaped\/90° gold-plated curved copper contacts, which have a very low internal resistance which also makes soldering wires to the terminal an ease.\u003cbr\u003e•The R-class insulation material is rated at 240 ° C, the special high-strength adhesive is rated at 340 ° C, and high quality international well known branded low friction bearings are used to handle extreme loads. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVarious specifications and models, covering 1\/8th various applications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e4 4268 On-Road series features two versions the 2000KV and 2800KV, which respectively are used for 1\/8 Pancar and GT. \u003cbr\u003e• 4268 Off-Road series consists of two versions the 1900KV and 2200K which respectively are used for 1\/8 Off-Road to allow the end user to race at different sized tracks \u003cbr\u003e• 4274 one version only consists of the 2250KV which is suitable for 1\/8 Off-Road recreational and popular with 1\/8th Truggy competition.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eScale - 1\/8th\u003cbr\u003eBrushed\/Brushless - BL\u003cbr\u003eSensored\/Sensorless - SD\u003cbr\u003ePole Count - 4\u003cbr\u003eKV Rating - 2400KV\u003cbr\u003eLiPo - 2-4s\u003cbr\u003eNo-load Current(A) - 4.3A\u003cbr\u003eO.D. (mm) - 42 (1.654in)\u003cbr\u003eLength (mm) - 67.8 (2.669in)\u003cbr\u003eShaft Diameter (mm) - 5.0 (0.197in)\u003cbr\u003eWeight (g) - 276g\u003cbr\u003eFront Bearing - D16*D5*T5\u003cbr\u003eRear Bearing - D11*D5*T5\u003cbr\u003eTiming - 20-40 Degrees (Adjustable)\u003cbr\u003eApplications - 1\/8th On-road\u003cbr\u003e\u003cbr\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":65445358862685,"sku":"HW38010606","price":199.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1097\/8230\/3069\/files\/JC0606.jpg?v=1785752408","url":"https:\/\/www.3d-rc.co.uk\/products\/hw38010606","provider":"3D-RC.co.uk","version":"1.0","type":"link"}