{"product_id":"hw38020384","title":"AXE Plus R3 Combo and AXE4274SD 1700KV R3","description":"Introducing the Hobbywing XeRun AXE PLUS R3 Sensored Brushless Crawling Speed Control and AXE 4274SD 1700KV Combo.\u003cbr\u003e\u003cbr\u003eThe ESC supports up to 6S LiPo battery. It has a maximum output current of up to 135A.\u003cbr\u003e\u003cbr\u003eThe AXE R3 can be used on 1\/10th and 1\/8th crawler, also compatible with 1\/7th and 1\/6th crawler.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSuper Internal BEC\u003c\/strong\u003e\u003cbr\u003eIt has a built-in powerful BEC with a maximum output current of 15A. The voltage is switchable between 6V\/7.4V\/8.4Vand is suitable for various standard\/high-voltage servos and peripheral electrical equipment on the market (such as light sets, winches, etc.).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh protection level\u003c\/strong\u003e\u003cbr\u003eThe AXE R3 brushless system is now IP67 protected. It has excellent waterproofing and dust-proofing performance to cope with various climatic conditions.\u003cbr\u003eNote: The above-mentioned IP67 protection level is splash-proof, water-resistant, and dust-proof under normal use. It is not permanently effective, and the protective performance may decrease due to aging. Do not submerge in water for a long time, otherwise the product may be damaged.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWidely applicable 6S high-power crawler ESC\u003c\/strong\u003e\u003cbr\u003eThe ESC supports up to 6S LiPo battery. It has a maximum output current of up to 135A.\u003cbr\u003eThe AXE R3 can be used on 1\/10th and 1\/8th crawler, also compatible with 1\/7th and 1\/6th crawler.\u003cbr\u003eNew compact design. Compatible with all Axe R2 motors.\u003cbr\u003e\u003cbr\u003eThe AXE R3 is 2.1mm longer, 1.7mm wider and 3.7mm shorter than the R2 ESC.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual external control channels, real-time adjustment of parameters\u003c\/strong\u003e\u003cbr\u003eConnect the white and yellow signal cables to open channels of the receiver to adjust parameters in real time.\u003cbr\u003eThe actual functions of the white and yellow wires correspond to the setting parameters of channel 3\/4 in the parameter table respectively.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFOC drive,  linear, with plenty torque, and very quiet\u003c\/strong\u003e\u003cbr\u003eThe XeRun AXE R3 is equipped with a FOC drive system. The large torque and excellent linearity when operating at low speed further exceeds ordinary brushless power systems and out performs brushed power systems. The XeRun AXE R3 is nearly silent, and it’s the perfect choice for crawling vehicles.\u003cbr\u003eSmart torque output, easy to control\u003cbr\u003eThe ESC automatically increases the torque output to overcome resistance and accelerate up the hill. Vice versa, the ESC automatically reduces the torque output and stabilizes the vehicle speed when going down the hill. Provides excellent control going Up, or Down hills.\u003cbr\u003eSmart fan start and stop function\u003cbr\u003eThe fan starts to operate automatically ONLY when the ESC temperature reaches the preset value. The smart start and stop function of the fan helps to save power, reduce noise, and also ensures that the ESC works in a good temperature range.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-in Bluetooth for Connecting the Mobile APP Directly\u003c\/strong\u003e\u003cbr\u003eThe ESC has a built-in Bluetooth module. Parameter settings, data reading, firmware upgrade and other operations can be achieved by connecting the device to the mobile APP.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eObtain AXE Running Status with Real-time Data Function with ease\u003c\/strong\u003e\u003cbr\u003eConnect the ESC to the HW Link mobile app and turn on the real-time data function. You are able to view throttle, voltage, current, temperature, speed and other data in real time, and obtain the ESC and motor operating status with ease.\u003cbr\u003eThe effective distance is only about 5m due to transmission distance of bluetooth.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-in data logging function,ease of obtaining power operating status\u003c\/strong\u003e\u003cbr\u003eThe ESC has a built in data rcoerding module. Store up to 10 minutes of your most recent run. Using the HW Link V2 App, you can view the data saved to the ESC. In addition, the module allows you to view Real Time Data from the ESC for bench top testing and viewing of the data outputs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompatible with AXE R2 motor\u003c\/strong\u003e\u003cbr\u003eAXE R3 ESC supports both AXE 4274 R3 motor and AXE 550\/540L\/540 R2 motor. AXE R2 motor, 2800KV\/2100KV\/1400KV\/2300KV are recommended to use 3-4S. Supports Flysky i-BUS2 protocol.\u003cbr\u003eAchieve real-time ESC parameter adjustments using the I-BUS2 protocol on the Flysky Noble controllers. Additionally, the data return function has been implemented to the Flysky Noble remote controllers. You will be able to view data such as battery voltage, motor rpm, operating current, ESC\/motor temperature, etc in real time on the transmitter.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA vast variety of parameters\u003c\/strong\u003e\u003cbr\u003eThe XeRun AXE R3 has a vast variety of parameters for adjustment. It has a total of 21 adjustable parameters and supports 24-degree adjustable Turbo timing.The maximum speed can be unleashed with good road conditions.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eXeRun AXE PLUS R3\u003c\/strong\u003e\u003cbr\u003eApplications: 1\/10th and 1\/8th crawler, 1\/7th and 1\/6th crawler\u003cbr\u003eCont.\/Peak Current: 135A\/600A\u003cbr\u003eLiPo Cells: 2-6S Lipo\u003cbr\u003eMotor Type: Only the XERUN AXE R3\/R2 Series\u003cbr\u003eBEC Output: 6V\/7.4V\/8.4V adjustable, Continuous Current of 6A\u003cbr\u003eSize\/Weight (including wire): 49.5*37.9*22.8mm(without fan)\/126.5g\u003cbr\u003eProgramming port: iOS or Android smart phone (installed with the HW LINK app)\u003cbr\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eMotor\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cb\u003e6S high power, for crawlers\u003c\/b\u003e\u003cbr\u003eThe XeRun AXE R3 motor supports up to 6S LiPo battery. The maximum output power is increased by 106%, and is 11% more efficienct compared to the R2 motor.\u003cbr\u003eThe default mounting hole is 25.4mm. Please purchase the AXE 4274 motor conversion board if the mounting hole is 30mm.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTwo KV options, wide application\u003c\/b\u003e\u003cbr\u003eAXE 4274 R3 is available in both 1700\/2000KV options. It meets various application requirements for 1\/8th, 1\/7th, and 1\/6th scale crawlers.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eExcellent protection\u003c\/b\u003e\u003cbr\u003eThe AXE R3 motor is now IP67 protected. The motor has the proven Hobbywing water proof sensor harness design to cope with complex and various climatic conditions.\u003cbr\u003eThe above-mentioned IP67 protection level is\u003cbr\u003esplash-proof, water-resistant, and dust-proof under normal use. It is not permanently effective, and the protective performance may decrease due to aging. Extended water exposure (submersion) may lead to damage.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePrecision Magnetic sensor\u003c\/b\u003e\u003cbr\u003eThe motor has a built-in magnetic encoding sensor. The accuracy 60 times better compared to the traditional sensor commonly used in brushless motors. The three-phase signal has excellent consistency and it provides accurate signals from the rotor position.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSupports optional motor adapter, strong compatibility\u003c\/b\u003e\u003cbr\u003eThe XeRun AXE R3 motor is built-in with 4 sets of 25.4mm mounting holes, and 4 for M3\/M4 respectively. If the frame mounting holes are 30mm, an optional motor mounting conversion plate is available for purchase.\u003cbr\u003eThe conversion plate is an optional accessory and needs to be purchased separately!\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePremium materials, performance upgrade\u003c\/b\u003e\u003cbr\u003eHobbywing uses high quality aluminum CNC shell, first-line brand high-quality bearings, first-line brand ultra-thin silicon steel sheets, and 200°C high-temperature-resistant enameled wire, and high-toughness alloy output shaft. We are committed to deliver excellent performance to worldwide users.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cu\u003eSpecifications\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eType\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eScale - 1\/8th,1\/6th\u003cbr\u003eBrushed\/Brushless - BL\u003cbr\u003eSensored\/Sensorless - SD\u003cbr\u003ePole Count - 4\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRelevant Parameters\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eKV Rating - 1700\u003cbr\u003eLiPo Cells - 2-6S\u003cbr\u003eNo-load Current(A) - 4\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSize \u0026amp; Weight\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eO.D.(mm) - 42\u003cbr\u003eLength (mm) - 74\u003cbr\u003eShaft Diameter (mm) - 5\u003cbr\u003eWeight (g) - 415\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplications\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eESC - XERUN AXE PIUS R3\u003cbr\u003e\u003cbr\u003eVehicles - 1\/8th,1\/6th Rock Crawler, AXIAL SCX6, KM FORD RAPTOR F150, YIKONG YK4082","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":65444941791581,"sku":"HW38020384","price":259.99,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/www.3d-rc.co.uk\/products\/hw38020384","provider":"3D-RC.co.uk","version":"1.0","type":"link"}