{"product_id":"sk-100181","title":"SKY RC NC2200 AA\/AAA Charger","description":"This SkyRC NC2200 AA\/AAA battery charger-analyzer charges up to 4 batteries at once, so you can quickly power your electronic devices. The visual charging status keeps you informed on when your batteries are ready for use.\u003cbr\u003eIt can handle 1 to 4 AA and AAA NiMH\/NiCD rechargeable batteries via four independent charging slots with its respective interface.\u003cbr\u003eWith the wide-viewing VA screen, the charger displays Current, Capacity, Internal Resistance, Voltage, Elapsed Time, and working mode at a glance. Meanwhile, the charging graph and firmware upgrading can be accessible with the SkyCharger app if you connect the optional Bluetooth Dongle.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNC2200 on a Power Chip.\u003c\/strong\u003e\u003cbr\u003eThe Cortex-M3 processor is specifically developed for high-performance, cost-effective platforms for various devices, including microcontrollers, automotive body systems, industrial control systems, and wireless networking and sensors.\u003cbr\u003e\u003cbr\u003eThanks to Cortex-M3 by ARM, NC2200 can complete real-time acquisition of battery voltage and current, and the charging process under intelligent control. It can automatically calculate the remaining charging time of the battery and adjust the parameters. System management circuit also has a protective function, which can prevent damage to the battery from overcharge and overtime.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e5 Modes to Stay Charged \u0026amp; Healthy\u003c\/strong\u003e\u003cbr\u003eNC2200 comes with five operation modes: Turbo(fast charge), Charge, Discharge, Refresh \u0026amp; Analyze and Break-in. With these five modes, you can charge, optimize your battery, and even you can rescue the battery from dying.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOverheating is Prevented\u003c\/strong\u003e\u003cbr\u003eThe internal resistance of the battery usually increases as it is used.\u003cbr\u003eWhen the battery is used for a long time, its internal resistance will increase. The internal resistance consumes part of the electric energy when charging and causes the battery to heat up simultaneously.\u003cbr\u003eSkyRC deploys an innovative FlexiPulse algorithm for internal resistance detection in this charger.\u003cbr\u003eOnce a high internal resistance is detected, the charge current will automatically decrease to reduce the overall heating and protect the battery.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStunning Display:\u003c\/strong\u003e\u003cbr\u003eDeep Blacks and Bright Whites\u003cbr\u003eIn high contrast black and white, current, capacity, internal resistance, voltage, elapsed time and working mode are displayed stunningly at a glance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRescue a Battery to Further Life! Any useless battery in your drawer?\u003c\/strong\u003e\u003cbr\u003eWith NC2200, users can try to rescue useless or none-performing-well batteries. Regardless that it is against the law to dispose of these batteries improperly, you have some chance to save the almost dead batteries.\u003cbr\u003eAfter trying all the modes as in the manual, refer to the battery rescue steps as simple as 1-2-3:\u003cbr\u003e1. Use the REFRESH \u0026amp; ANALYZE mode once to three times.\u003cbr\u003e2. Change to BREAK-IN mode if the capacity is still low.\u003cbr\u003e3. If the second steps can improve the battery capacity by more than 10%, please try BREAK-IN mode once to three times again. If there are no significant improvements and the actual battery capacity is less than 60% of its rated capacity. The battery would probably be at the end of its life and needs to be replaced.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cu\u003eSpecifications\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003eSize and Weight\u003cbr\u003eDimension: 112.1*108*62 mm\u003cbr\u003eWeight: 370g\u003cbr\u003eOther Parameters\u003cbr\u003eBattery Type: NiMH\/NiCD\u003cbr\u003eBattery Size: AA\/AAA\u003cbr\u003eCharge Rate: 0.2-2.2A w\/ increments of 0.1A\u003cbr\u003eDischarge Rate: 0.1-1.0A w\/ increments of 0.1A\u003cbr\u003eDischarge Termination Voltage: 0.9V\u003cbr\u003eSupported Capacity: 500-3200mAh\u003cbr\u003eCapacity Protection: 3200mAh\u003cbr\u003eInput Power: DC 12V\/2.0A\u003cbr\u003e-△V: 5mV\u003cbr\u003e","brand":"SKY RC","offers":[{"title":"Default Title","offer_id":65450146234717,"sku":"SK-100181","price":56.99,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/www.3d-rc.co.uk\/products\/sk-100181","provider":"3D-RC.co.uk","version":"1.0","type":"link"}