{"product_id":"sk-500037","title":"SKY RC Infrared Thermometer","description":"\u003cstrong\u003eSkyRC ITP380 Infrared Thermometer is a must-have for RC hobbyists to track temperatures.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNow you can take temperature measurement at a safe distance with SkyRC ITP380. RC hobbyists will never get burned or air blowing in your face from the RC vehicles, engines, motors, chargers, etc., while taking measurements.\u003cbr\u003eYou can trust SkyRC ITP380 to get accurate temperature readings from a safe distance, wherever indoor or outdoor.\u003cbr\u003eSkyRC has engineered the ITP380 temperature measuring with accuracy down to the 0.1 °F and the object temperatures ranging from -40°F (-40°C) to 716°F (380°C).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eµm Accuracy\u003c\/strong\u003e\u003cbr\u003eCompared to its predecessor, SkyRC deploys a classic TO-46 housing thermopile sensor. The thermopile sensing element, composed of 116 elements of small thermocouples with an active area of diameter 545 µm on a silicon chip, absorb the energy and produce an output signal. It provides nearly Johnson-noise-limited performance, which can be calculated by its ohmic series resistance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDistance-to-Spot Ratio 6:1\u003c\/strong\u003e\u003cbr\u003eEvery infrared thermometer has a \"distance-to-spot\" (D:S) ratio that tells you the diameter of the area being measured compared to the distance from the target.\u003cbr\u003eThe 380P thermometer has a distance-to-spot ratio of 6:1. That means it measures an approximately one-inch-diameter spot when it's 6 inches from the target (about 2.5 cm at 30 cm).\u003cbr\u003eIt means ITP380 thermometer can accurately measure targets at greater distances compared to many other thermometers;\u003cbr\u003eDistance-to-spot ratio is crucial to measuring! So be sure to measure at this D:S ratio.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eQuick and Accurate Readings\u003c\/strong\u003e\u003cbr\u003ePoint, aim, tap: three steps to get accurate readings on the go within 1 second.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEasily Selectable\u003c\/strong\u003e\u003cbr\u003eBetween Fahrenheit and Celsius\u003cbr\u003eTo switch between Celsius and Fahrenheit, simply press the UNIT button. The value will be converted instantly, thanks to the pre-programmed algorithm.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow-battery Indication Auto-power Off\u003c\/strong\u003e\u003cbr\u003eThe thermometer display will indicate whenever low on battery. It will automatically power off after inactivity of 60 seconds.\u003cbr\u003eBattery life is extended!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCompact Design\u003c\/strong\u003e\u003cbr\u003eThe ultra-compact design lets you slip it in your pocket, you can take it everywhere.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImpressive Stunning VA Display\u003c\/strong\u003e\u003cbr\u003eThe VA invert display enables super-high static contrast ratios for impressive stunning visioning. Indoor or outdoor, you will get clear data reading from any angle.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVersatile for The Hobby, Craft and Household\u003c\/strong\u003e\u003cbr\u003eNote: ITP380 thermometer is not intended for human body temperature measurement, neither for the animal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFour Measuring Modes\u003c\/strong\u003e\u003cbr\u003eQuick Mode\/Scan Mode\/Maximum Mode\/Minimum Mode\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMultiple Emissivity Coefficients\u003c\/strong\u003e\u003cbr\u003eThe emissivity coefficient indicates the radiation of heat. For some products, the emissivity coefficients varies with the temperature.\u003cbr\u003eAs a professional infrared thermometer, SkyRC ITP380 can be adjusted for different emissivity coefficients depending on the material to achieve the best measurement.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNIST Traceable Calibration\u003c\/strong\u003e\u003cbr\u003eNIST traceable calibration certifies that the lab or manufacturer in question is equipped and able to calibrate equipment to National Institute of Standards and Technology (NIST) standards and that products by that manufacturer match NIST-maintained measurement standards. With NIST traceable calibration, any measurements taken with a certified instrument have an unbroken chain of measurement leading back to NIST-maintained standards with known and documented uncertainties for each step in the chain and a quality assurance program in place to address them.\u003cbr\u003eWe not only ship products, but we're also delivering trust!\u003cbr\u003e\u003cbr\u003eBeep Signals for Every Operation And Can Be Silenced\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cu\u003eSpecifications\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSize and Weight\u003c\/strong\u003e\u003cbr\u003eDimension: 121x40x39.6mm\u003cbr\u003eWeight: 75g\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOther Parameters\u003c\/strong\u003e\u003cbr\u003eOperation Voltage: AAA battery X 2\u003cbr\u003eOperation Current: =40ma@3.0V\u003cbr\u003eOperation Temperature: 0-50?\u003cbr\u003eCurrent Drain: =25ua@3V\u003cbr\u003ePrecision:\u003cbr\u003e-40degC-0degC +\/-1.5degC\u003cbr\u003e0degC-380degC +\/-1.5degC\u003cbr\u003e-40degF~32? \/ ±3degF\u003cbr\u003e32degF~716degF \/ ±3degF\u003cbr\u003eAdjustable Range for Infrared Emission Frequency: 0.01-1\u003cbr\u003e\u003cbr\u003e","brand":"SKY RC","offers":[{"title":"Default Title","offer_id":65446935462237,"sku":"SK-500037","price":36.99,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/www.3d-rc.co.uk\/products\/sk-500037","provider":"3D-RC.co.uk","version":"1.0","type":"link"}